PURSUIT BOATS Pursuit DC 265 Dual Console

< Back to search

Description

The 2015 Pursuit 265 DC, UNFETTERED, is a great example of this popular dual-console bow rider. Featuring a central walk-through, this vessel has been yard-maintained and constantly buffed and polished. It comes with fore and aft cockpit covers, as well as a custom-fitted Fisher winter cover. She is powered by a 350 HP Yamaha with low hours. Additional features include an enclosed head with an unused electric toilet, a factory hardtop, a Garmin plotter, and a stainless steel anchor. A 2021 dual-axle galvanized trailer is also available for purchase. This Pursuit 265 DC is turnkey and ready for the summer! The owner is selling to purchase a larger boat. A Berthon Essential listing.

Construction

Hull, Deck & Superstructure Construction:

  • Pursuit fresh white gelcoat.
  • Hand laminated hull with vinyl ester resin and engineered fabrics.
  • 5-ply resin infused composite transom system.
  • Infused fiberglass structural grid system with molded finish and integrated bilge water management system.
  • Foam filled structural grid.
  • Bronze thru hull fittings below water line.
  • Chrome over bronze thru hull fittings below the 7-degree heel line.
  • Stainless clad composite thru hull fittings above the 7-degree heel line.
  • Bronze garboard drain.
  • Hull and deck joint mechanically fastened.
  • Rub Rail - high density PVC with solid 316l stainless steel insert.
  • Molded one piece deck and cockpit liner with non-skid pattern area.

Machinery

Engine & Gearboxes:

  • 1 x Yamaha, 350hp outboard.
  • Engine Hours: c. 260 hours.
  • Yamaha water separating fuel filter with primer bulbs.

 

Maintenance & Performance:

  • Yard maintained, serviced in spring/fall annually.

 

Propulsion & Steering:

  • 316L stainless steel steering wheel on tilt helm.
  • Hydraulic steering pump.
  • Trim tabs, Lenco Electric with auto-retract.

Electrical Systems

  • UL rated fully tinned, color-coded copper wire.
  • Custom in-house built, heat sealed, mechanically crimped, color-coded battery cables.
  • Custom in-house built, one-piece electrical harness with water proof connectors and chafe protection.
  • Powder coated, aluminum, screen printed (front and back) battery switch and breaker panel.
  • Two battery system; 1 x engine and 1 x house.
  • One grounding bus bar.
  • Electronics Fuse Block12V panel with illuminated carling rocker switches at helm.
  • 1 x 12V outlet at helm.

Plumbing Systems

General:

  • Raw water/livewell pump with sea strainer, seacock, and thru hull fitting.
  • Raw water outlet in cockpit with quick connect fittings and 25’ hose.
  • Premium sea tech color coded water hose system with mechanically crimped ends.
  • Bronze through hull fitting with seacock.

 

Fresh Water & Water Heating System:

  • Fresh water pump with filter.
  • Cockpit shower.

 

Bilge Pumps:

  • 2 x Bilge pumps with electronic switches and stainless-steel clad composite thru hull fittings.

Tankage

Fuel:

  • Total fuel capacity of 139 US gallons (526 litres).
  • EPA compliant lined rotomolded tank with engine pickup, shutoff valves, digital level indicator, and deck fuel fill plate.

 

Fresh Water:

  • Total fresh water capacity of 18.5 US gallons (70 litres).
  • 316L stainless steel deck fill plate.

 

Grey/Blackwater Holding Tanks:

  • Total capacity of 49.21 litres (13 US gallons) in 1 x holding tank for head.
  • Macerator discharge pump.
  • 316L stainless steel deck pump-out fitting.

Navigation Equipment

  • Compass at helm.
  • Navigation lights, LED, 2 mile.
  • Garmin XSV 12 plotter.
  • Horizon VHF.

Domestic Equipment

Heads/Showers:

  • 1 x Electric marine head (unused).

 

Lighting:

  • Integrally switched 12V overhead lights at console and in head.

Accommodation

General:

  • Molded interior white gel coat.
  • Molded hatch with gasket and stainless-steel gas spring.

 

Cockpit:

  • Molded fiberglass windshield frame with tempered glass windshield and a center walk-through door.
  • Fiberglass hardtop with white powder-coated aluminum frame including eisenglass front and side enclosures
  • Windshield wiper.
  • Drink holders, 316L stainless steel, 2 x bow, 4 x helm/companion and 2 x in gunwale.
  • Cockpit upholstery.
  • Fiberglass hardtop with white powder-coated aluminum frame including front and side enclosures.
  • Raw water outlet in cockpit with quick connect fittings and 25' hose.
  • Cockpit midship floor storage.
  • 3 x LED cockpit accent lights.
  • Folding transom seat with patented adjusting backrest.
  • Folding seat (portside) under gunwale.
  • Fixed forward facing companion seat.
  • Aft facing cockpit seat with insulated cooler below.
  • Starboard side sink with cutting board and fiberglass lid.

 

Helm:

  • Molded console with fixed helm and integrated footrest.
  • Trim tab control panel and indicator.
  • Visor.
  • Starboard coaming box/cup holder & storage.
  • Windshield wiper.
  • Yamaha command link plus display.

 

Console (Starboard Side):

  • Molded fiberglass lined storage with starboard door under helm.
  • Dedicated dock line storage.

 

Head (Portside):

  • Fiberglass door with gasket, integrated storage and 316 stainless steel latch.
  • Molded fiberglass interior.
  • Console entry step.
  • Sink with pullout freshwater shower.
  • Toilet tissue holder.

Deck Equipment

General:

  • Bow seating with insulated storage below.
  • Molded recessed hatches with gaskets and 316L stainless steel latches and overboard drain tracks.
  • Self-draining cockpit with bronze ball valve at hull side.
  • Cockpit shower.
  • Transom grab rails, 316L stainless steel, (port & starboard).
  • Molded Transom Walkthrough with Hinged transom door, 316L stainless steel latch and magnetic catch.
  • Bow grab rails, 316L stainless steel (port & starboard).
  • Boarding ladder, 3-step telescopic, mounted in hull platform.
  • Dedicated transducer location.

 

Anchoring & Mooring Equipment:

  • Anchor system, integrally molded thru stem.
  • Flush mounted integral anchor locker with fiberglass lid including 316L stainless steel through stem anchor roller with 8" mooring cleat, chain binder, 14 lb. stainless steel plow style anchor, shackle and 150' rode (1/2" 8 plait including 10' of ¼" G4 chain).
  • Bow Eye, 1/2" 316L stainless steel.
  • Stern Eyes (2), 1/2" 316L stainless steel.
  • Cleats, 316 stainless steel, 8" pop up 2 x stern, 2 x spring and 2 x bow.
  • Electric windlass with controller.
  • Dock lines.
  • Fenders.

 

Covers, Canvas & Cushions:

  • Sunbrella bow tonneau cover.
  • Instrument cover.
  • Aft snap-on cover from hardtop to transom.
  • Fitted Fisher winter cover

 

Fishing Features:

  • 2 x Rod holders, stainless steel, in gunwale.
  • Lighted Oceana Blue 19-gallon recirculating insulated live well.
  • Under gunwale rod storage (starboard).
  • Fish box, in-transom (31 gallon) insulated fiberglass with drain.
  • Tackle drawer/storage under sink.
  • Aluminum reinforcement plates for downrigger installation, aft gunwale (port and starboard).

Safety Equipment

  • Horn, electric, with oval stainless-steel cover.
  • Coast guard lifejackets.
  • Flares.

 

Fire-Fighting Equipment:


  • Helm Fire Extinguisher.

Contact The Seller

General Information

Name
UNFETTERED
Year
2015
New or used
used
Lying
United States

Accommodation

Measurements

Length overall (m)
7.87
Beam (m)
2.66

Engines

About The Seller

Berthon International

40 Mary Street

Newport

Rhode Island

02840

United States

ABYA
Copyright © 2024 Association of Brokers and Yacht Agents Ltd. Registered in England no. 1898652.
Website by TheYachtMarket.